01. |
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life. |
02. |
Uses one main circuit board for easy maintenance. |
03. |
Uses the latest micro-controller chip for control functions. |
04. |
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. |
05. |
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes & drive increases. |
06 |
Connected drive is automatically recognised & indicated by means of LED on the torque controller. |
07. |
Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused. |
08. |
Actual drive wattage (torque) is displayed. Set wattage (torque), drive current and line voltage can be seen by press of a button. |
09. |
Trip time adjustable from ( 0.1 sec to 10 secs. ) |
10. |
Adjustable reverse time from ( 1 sec to 100 secs.) |
11. |
Pause time (time interval between cycles) adjustable from ( 1 sec to 100 secs.) |
12. |
Manual reverse by push button, in case of emergency. |
13. |
Drive Speed adjustable in reverse rotation. |
14. |
Hand (trigger) mode or foot switch mode, both are available. |
15. |
Expansions can be carried out either in single cycle mode or auto repeat mode. |
16. |
LED indicators provided for forward, reverse & trip conditions of drive. |
17. |
MCB has been provided to protect the and drives against over current by short circuits. |
18. |
Plug in type of PCBs reduce down time to minimum during trouble shooting. |
19. |
All the spares inside the panel viz : PCBs, Transformers, CT, Relays DPM etc. can be replaced by use of only a screw driver. |
20. |
Superior SCR technology has been incorporated rather than triacs. SCRS have much better voltage, current & dv/dt ratings than triacs. This leads to greater reliability & the power circuit becomes almost failsafe. |
21. |
Niksu has over 1000 TCW Torque Controllers in active use worldwide since its inception in year 2000. |